Rosewater MP Soap Kit

Making our Rosewater MP Soap:

Here's what you'll get in this soap starter kit:

• Clear Melt and Pour Soap Base
• Rosewater and Salt Fragrance Oil
• Gold Mica
• Iridescent Radiance Gold
• Plastic Medium Rose Mold
• Tomato Red FUN Soap Colorant
• Neon Red FUN Soap Colorant
• 2 oz Clear Bullet Bottle
• 20/410 Fine Mist Sprayer

Other items needed: Microwave-Safe Bowl, Microwave, Scale, Mixing Spoon, Cutting Board, Large Knife, Isopropyl Alcohol, Scissors, Parchment Paper or Wax Paper, Paint Brush

1. Clean and sanitize your work area along with all of your materials. We also suggest that you wear protective clothing, protective gloves, and a hair net while making this recipe. Also, fill your bullet bottle of isopropyl alcohol. Trim the dip tube of the sprayer and place the sprayer on the bottle.
2. Weigh out and melt 110 grams of the clear melt and pour soap base.
3. Melt the soap in 30-second intervals, stirring in between each 30-second burst, until the soap is in a fluid state.
4. Once melted add 1 drop of the neon red and 1 drop of the tomato red FUN Soap Colorants.  Stir.
5. Next, add 3 grams of the Rosewater and Salt Fragrance Oil.  Stir.
6. Pour the soap into 4 cavities of the rose mold. Spray the soap with isopropyl alcohol to release any air bubbles. Allow the soap to set up before removing the soap from the mold.
7. Prepare a piece of wax paper or parchment paper. We used this to cover our work area.  You could also use a paper plate.
8. Dust your soap with the gold mica and the iridescent with your paint brush.
9. When purchasing the kit, you will have enough ingredients to make this recipe a total of 8 times.  Once you create your soap, you will want to make sure you wrap it right away to prevent sweating.