Scroll to top
Make Your Own Candles, Soaps & Cosmetics

Hemp Leaf- Mold Market Molds

Hemp Leaf- Mold Market Molds
 Hemp Leaf- Mold Market Molds


Hemp Leaf Mold Market Molds

Hemp Leaf mold specifics:
A clear 3 cavity mold. Each cavity holds approximately 4.5 ounces. Measures 2.75 x 2.75, 1 inch deep. Pouring temperatures should not exceed 145 degrees F. Pouring above these temperatures may warp or damage the mold.

Mold Market designs and manufactures high quality plastic soap molds for all occasions. Our multi cavity custom molds designs are suitable for hot and cold process soap making, melt & pour soap making, candle making, and ceramic crafts.

Natures Garden is a distributor of Mold Market Molds. In the good ole USA. Mold Market is committed to providing jobs for American workers and to supporting domestic manufacturers and suppliers. Our molds are American made and we are proud of this fact.

Made in the USA Molds

Mold Market molds are produced in United State factories. Many mold companies in the industry have moved production overseas to take advantage of low labor costs and generally cheaper production costs. We are saddened to find that some companies are advertising Made in the USA when this is not true. Mold Market elects to provide jobs to the U.S. workforce despite the competition from lower cost imports. We hope that you will support us in our effort to provide high quality designer molds for discriminating consumers desiring U.S products.

Mold size and pouring temperature of soap will determine set up time. It is imperative that you allow soap to cool completely before trying to remove from any mold. Depressions will occur in the top of mold if you try to release soap by force. Allow molded soaps to sit for at least 1 hour for best results. Gently pull the at the sides of  the mold. This releases entrapped air between the mold and soap. Using firm, but gentle pressure, push on the top of mold until soap is released. If you are still having difficulty, place mold in the freezer for 10-15 minutes.

Mold Tips for CP (cold process) soapers:

  • Do not use oil in the molds, it will make the CP stick more because the traced soap wants to grab onto the oils. When you get a new mold, wash it in warm soapy water, rinse and dry with a soft towel and buff it.
  • Use borax in the water before you add the lye. Add 2 tsp of Borax for every 6 oz of water, stir till it's dissolved and then add your lye to it. What this will do is firm up the CP and make releasing it a breeze.
  • If the top part of the CP is hard and the bottom is mushy, it might not have had a full trace.
  • If using Palm Oil as part of your recipe, stir the oil before scooping it out on your scale. Most soap makers do not know that the Oleic Fatty Acid in the Palm Oil will sink to the bottom of the container as the oil solidifies and the other fatty acids will float to the top. If the Palm Oil is just scooped out from the top of the container, you get a soft soap but as you get to the bottom of the container, you'll find you get a harder bar of soap because the Oleic Fatty Acid has sunk down. when using a 5 gallon bucket of oil, dig a hole down into the Palm Oil and start scooping the oil out from the bottom to the top so you have a mix of complete oil.
  • If the CP sticks in the mold... do not force it out but instead put the whole mold into the freezer for 30 minutes, take it out and let the plastic mold come to room temperature which is about 2 minutes. Put a towel on the counter and turn the mold over on the towel, now put your fingers under the mold and gently pull the sides of the mold to allow air in and then with your thumbs on top of the mold, press as your go around the mold. You should see the air releasing it from the mold.

Reward Points

Purchasing this can earn you 8.15 ($0.08) rewards points!

Related Products

Customers who purchased this frequently purchase


Average Customer Rating: (4 Reviews) Write a Review (requires login)

5.0 4 Hemp Leaf- Mold Market Molds

A real winner!! Review rating is 5 stars

5 Hemp Leaf- Mold Market Molds

Reviewer: from Pasadena, Ca

Wow!! This is a winner. Even straight-laced looking people were interested in this soap. I scented mine with "Cannabis Flower" and had people asking me for them as soon as I posted a pic. I colored a small amount of white soap (unscented) with green and used a dropper to fill in the leaf detail. After a couple of minutes just pour your scented base and voilâ! The bars are generous and pop out easily. I'm so glad I ordered this mold. Made in USA is a plus!

Did you find this review useful? yes no

Awesome! Review rating is 5 stars

5 Hemp Leaf- Mold Market Molds

Reviewer: from Ridge Manor, FL US

Love this soap mold, a great amount of soap! Customers love this soap!

1 of 1 people found this review helpful. Do you? yes no

Great Mold Review rating is 5 stars

5 Hemp Leaf- Mold Market Molds

Reviewer: from Whiteface, TX US

Loved this mold. It holds an amazing amount of soap, and the bars are rather generous. It is a heavy plastic that should hold up well for a long time.

1 of 1 people found this review helpful. Do you? yes no

great mold Review rating is 5 stars

5 Hemp Leaf- Mold Market Molds

Reviewer: from Jasper, IN US

Had no problems using this mold. It holds a good amount of soap. Thanks NG

Did you find this review useful? yes no

Next Page

Q & A

Your Price: $8.15

Mi9 Retail