Scroll to top
Make Your Own Candles, Soaps & Cosmetics
 Marbled Pillar Candle Recipe download-recipe

Marbled Pillar Candle Recipe

Recipe makes 1 scented candle.

Ingredients Found At Natures Garden:

Directions:

Other Ingredients & Equipment You'll Need:
Scale
Mixing Spoon
Pot (for double boiler)
Water
Pan (lined with wax paper)
 
Step 1:  Prepare your molds.  You will need the 3 x 4.5 inch round pillar mold.  Place a wick through the hole in the bottom of each of the molds.  Then, you can place a plug in the bottom of the mold.  Alternatively, you can use hot glue to completely seal the hole.  
 
Step 2:  Now, weigh out and melt 475 grams of the Pillar of Bliss Candle Wax.  Melt the wax using a double boiler to 195F.
 
Step 3:  Once melted, allow the temperature to drop to 185F.  Add 47 grams of the Paris le Fleur Fragrance Oil.  Stir.
 
Step 4:  At 175F pour the wax.  You will want to fill the mold ¾ of the way.  Allow the wax to set up at room temperature.  Poke relief holes.
 
Step 5:  Melt the remaining wax to 165F.  Then, fill the remainder of the mold.  Allow the candle to set up.  Remove the candle from the mold.
 
Step 6:  Fill a pouring pot about halfway full with water.
 
Step 7: Add a couple drops of each color of the liquid candle dye.  Using a toothpick, swirl until you are happy with the colors.
 
Step 8:  Dip the candle in the water.  Place it on the pan to dry.  The dry time will depend on the amount of colorant on the candle.  Ours took about 5 days.
 
Once cured, your candle is ready to use!  Enjoy!
 
Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations if applicable. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients. We also do not offer any advice on formulating or altering recipes.
Mi9 Retail