Make Your Own Candles, Soaps & Cosmetics
 Bamboo Hemp Soap Recipe

Bamboo Hemp Soap Recipe

Recipe makes approximately 16 bars of soap.

Ingredients Found At Natures Garden:

Directions:

Bamboo Hemp Soap Recipe

 

Other Ingredients & Equipment You'll Need:
Microwave safe-Mixing Bowls (2)
Mixing Spoons
Microwave
Scale
Knife
Rubbing Alcohol
Cutting Board
 

Total Recipe Weights and Amounts:
400 grams Diamond Clear Melt and Pour Soap
590 grams Hemp Oil Melt and Pour Soap
29 grams Bamboo Hemp Fragrance Oil
16 Whole Star Anise Seed

Step 1:  Before starting, clean and sanitize your work area along with all utensils and materials you will be using.  Also, it is suggested that you wear an apron, gloves, and a hair net when preparing this recipe.  In addition, fill one black bullet bottle with rubbing alcohol and place a sprayer on top.  Rubbing alcohol is used to remove air bubbles from the soap, and helps the layers of the soap adhere to each other.

Step 2:  First, we will prepare our whole star anise.  You will need 16 whole star anise for this recipe.  It is best to have these out and ready ahead of time because the clear layer will setup quickly. 

Step 3:  Next, we melt a portion of our clear layer.  Weigh out 200 grams of your Diamond Clear Melt and Pour Soap.  Melt this in the microwave in 30 second bursts, until it is in a liquid state.  We chose to leave this layer unscented since the fragrance oil has a yellow tint to it.

Step 4:  Once the clear soap is melted, pour it into the mold.  Then, place one star anise in the center of each square of the mold.  You will need to place them quickly as the soap will setup fast.  Then, spray this layer with rubbing alcohol to remove any air bubbles.  Allow this layer to setup completely before moving on.

Step 5:  You will notice the clear portion you poured doesn’t quite cover the entire star.  We poured only half of the layer to hold the star anise in place. Preparing the soap this way prevents the star anise from floating up or going crooked.  So, next, we will melt another 200 grams of the clear melt and pour soap to cover the rest of the star.

Step 6: Now, weigh out 200 grams of the Diamond Clear Melt, melt soap in microwave 30 seconds at a time until soap is fully melted. Then, spray your previous layer with rubbing alcohol.  Finally, pour the melted clear soap base directly on top of the previous clear layer and spray it once again with rubbing alcohol to release any air bubbles.

Step 7:  Next, once your clear soap layer has setup, we will prepare our white layer.  First, weigh out and melt 590 grams of Natures Garden’s Hemp Oil Melt and Pour Soap. Then, add 29 grams of Bamboo Hemp Fragrance Oil to the melted soap base and stir to incorporate the fragrance oil.

Step 8:  Finally, spray the soap in the mold with rubbing alcohol, then pour the melted soap slowly right on top of the clear layer.  Then, spray the white layer with rubbing alcohol to release any air bubbles.

Step 9:  When the soap has completely hardened, remove it from the mold.  You will notice the soap has indented lines to show you where to cut.  Use the soap cutter to slice along these lines creating 16 small soap squares, each with a star in the center.

Your layered soap in now ready to use!  We hope that you enjoyed this bamboo hemp melt and pour soap recipe!

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations if applicable. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients. We also do not offer any advice on formulating or altering recipes.

 

Mi9 Retail