Make Your Own Candles, Soaps & Cosmetics

Energize Cold Process Soap Recipe

Recipe makes approximately 1 heaped pound loaf of soap.

Ingredients Found At Natures Garden:

Directions:

Other Ingredients Needed:
Water
3 mixing bowls (for colors)
spatula

Total Recipe Weights:
172 grams of water
61 grams of Lye
118 grams of Shea Butter
68 grams of Meadowfoam Seed Oil
54 grams of Grapeseed Oil
113 grams of Coconut Oil 76
64 grams of Apricot Kernel Oil
36 grams of Castor Oil
28 grams of Grapefruit Lemongrass Energize Fragrance Oil
20 grams of Sodium Lactate

Soap Colorant Weights:
4 grams of Titanium Dioxide
5 grams of FUN Soap Colorant- Neon Pink
5 grams of FUN Soap Colorant- Neon Yellow

New to cold process  soap, please read: Basic CP Soap Making Class and Soap Making Safety Class.

Put on your safety gear and prep your work area.  Then, make your lye solution.  Now, weigh out and melt the soaping oils and butters.  Once melted, separate out 10 grams and place it in one of your mixing bowls.  Then, add the titanium dioxide to this and stir well to make a white paste. 

When the lye solution has cooled, add and stir in the sodium lactate. 

When both the lye solution and soaping oils are ready to be combined, do so.  Then, stick blend for emulsion.  Next, add the fragrance oil and once again, stick blend to incorporate. 

Now, get your 2 empty mixing bowls.  To the first bowl, add  the neon pink soap colorant.  To the second bowl add the neon yellow soap colorant.  Then, to each bowl add 151 grams of soap batter.  Using a spoon, stir each batter bowl to incorporate the color.  Then, set aside. 

To the remaining soap batter bowl, add the white paste and stick blend in to mix.

Get Ready to Move!  Starting with the pink soap batter drop several "plops"  in a clockwise like manner around the white soap batter bowl.  Do this until all of the pink batter is gone.  Then, repeat the same action with the yellow batter, aiming for different areas in the "clock ".

Now, drag the spatula is a large circular pattern once through the bowl.  Directly pick up the spatula when completed. 

Next, carefully and slowly pour the soap batter into the mold.  While pouring, move the soap back and forth through the whole length of the mold.  When the soap has set up enough, take the remaining soap and heap it on top.  Finally, insulate.


After 24 hours, remove the soap from the mold.  Then, with a knife, slice the bars.  Allow them to further cure before using. 

We hope that you enjoy our Energize Cold Process Soap Recipe!

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients.

 

 

 

 

 

Upshot Commerce
Ecommerce
 
Shopping Cart Software by
 
Upshot Commerce