What inspires you? Well, here at Nature’s Garden, we are inspired by pretty much everything, but lately we’ve been on a serious animal print kick! We found this amazing picture of this gorgeous tiger and couldn’t wait to get started on making a tiger stripe soap recipe! And we of course have used our Animalistic Instinct Fragrance, I mean how could we not? It’s absolutely perfect!
Our wonderful inspiration!
Make sure to try out our amazing Animalistic Instinct scent!
272 grams of Olive Oil
272 grams of Shea Butter
181 grams of Palm Oil
181 grams of Coconut Oil
70 grams of Animalistic Instinct Fragrance Oil
15 grams of Titanium Dioxide
7 grams of Neon Orange FUN Soap Colorant
5 grams of Black Oxide FUN Soap Colorant
125 grams of Lye
345 grams of Distilled Water
Other Ingredients Needed:
Always make sure to protect yourself first with your gloves, glasses, and mask! Then you can prepare your lye water. Weigh 345 grams of distilled water, and 125 grams of lye. Carefully pour your lye into your water. Never pour water into lye! This can cause an explosion! Thoroughly mix your lye water and then set it aside to cool down.
Next, you can get your butters and oils ready. Weigh out 272 grams of Shea Butter, 272 grams of Olive Oil, 181 grams of Palm Oil, and 181 grams of Coconut Oil 76. Melt these down completely and then set them aside to cool as well.
While you are waiting for both of these to cool, you can get your colors ready. In separate bowls, add 5 grams of Black Oxide colorant, and 7 grams of Neon Orange. Then in another bowl, measure out 15 grams of Titanium Dioxide, mixing this thoroughly with just a little bit of your oils from your base bowl until you have achieved a paste-like consistency.
Make sure to keep checking your oils and lye water temperatures using your thermometer, until they have reached about 72 degrees Fahrenheit (room temperature) and are within ten degrees of each other. Then carefully pour your lye water into your butters and oils, mixing it together very thoroughly with a stick blender until you have come to a light trace.
When your mixture is at a light trace, pour 400 grams into the bowl with black colorant, 500 into the orange, and 500 in a separate bowl, adding your titanium paste to this last bowl. Then thoroughly mix each color. Make sure to add 20 grams of your Animalistic Instinct fragrance to your black bowl, and 25 grams to the orange and white. Again, make sure to mix them thoroughly!
Once your colors are completely mixed, you can begin to pour them into your mold. We started with our orange, carefully pouring just a little bit in a straight line all the way across the mold.
Then we alternated all three colors until the mold was almost full, leaving just a little bit of each color in our bowls.
With the remaining colors, we splattered it over the top of the soap into gorgeous designs! Splatter the rest of your soap however your heart desires!
Once you have finished your soap, it will need to sit to set up for at least 24 hours before removing it from the mold. Once it is removed, your new Tiger Stripe Soap will need to sit for at least 4 to 6 weeks to give it enough time to cure and become less alkaline. After that, your soap will be ready for you to use and enjoy! Check out all the rest of our free recipes and classes and watch out for more Enlightened by Layla!