Tag Archives: sodium lactate

Mar
27

Sodium Lactate in Soap


This entry was posted in bath and body, bath products, Natures Garden, soap making problems, Soap making supplies, sodium lactate and tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , on by .

sodium-lactate-in-soapSodium Lactate in Soap

Hello everyone! I’m sure you’ve seen from most of my recent blogs that I’ve been experimenting with making many different soaps lately. I recently attempted making a Tiger Swirl Soap, and I actually had one major problem with it! While it was a beginner’s problem, I’m actually glad it happened so that I could learn from it! Have you ever experienced any problems while using sodium lactate in soap? For the base of this soap, I used our Shea Butter Cold Process Soap recipe, which happens to have 181 grams of Palm Oil in it. The palm oil actually contributed to the problem I had with using a high amount of sodium lactate in the soap.

In my Tiger Swirl Soap, I included Sodium Lactate in my recipe. Since Sodium Lactate helps to make your soap easier to remove from your mold, it seemed like a wonderful ingredient to include in my recipe! I added 55 grams of our Sodium Lactate to my lye water and thought that I was going to be so much better off! I finished my soap and it came out quite beautifully, beautiful bright orange, white, and bright green swirls! This was one soap that all of us here at Nature’s Garden were extremely excited about!

However, when we finally removed my Tiger Swirl soap from its mold and attempted to cut it, it just kept falling apart. This soap would literally just crumble in our hands. We were so disappointed, but then we tried to figure out what our problem might have been. First we thought maybe our calculations were off? But then we got to thinking about the Sodium Lactate since this was the first soap I’ve ever made with that particular ingredient. Sodium Lactate is used in cold process soap to help make a harder bar of soap. It can also be used to help your soap set up faster, so that you can remove it from your mold sooner!

After some research, we finally figured out my problem! Because I already had a high amount of Palm Oil in my soap, the addition of high levels of sodium lactate actually hardened the soap more than what we would have liked. This was caused because the combination of Palm Oil and Sodium Lactate made my soap way too hard and crumbly.

Don’t worry, these beautiful orange and green swirls will be back! I’m going to remake this soap without the Sodium Lactate and see how it turns out then! I will be back to report! While using a high amount of Sodium Lactate with Palm Oil is apparently not a good idea, you can still use just a small amount. For example, in the Aqua Di Gio soap I made after the Tiger Swirl, I only used 8 grams. (I still used our Shea Butter Soap for that base.) That soap turned out absolutely perfect! However, now we do recommend using Sodium Lactate mainly in palm-free recipes. Have you ever had any problems using sodium lactate in soap? I would love to hear from you! Make sure to check out all of our free classes and recipes, and keep watching for more Enlightened by Layla!

enlightened-by-layla

Mar
06

Tie Dye Soap


This entry was posted in bath and body, bath products, cold process soap, cold process soap colorant, cold process soap scents, colorants, creative, Fragrance Oils, Natures Garden, Soap making supplies and tagged , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , on by .

cup column swirl soapWatching all of the cool Youtube videos on making column swirl soap, we had to give it a try.  We thought that the column concept would make a great tie dye soap.  This soap recipe was our attempt at doing a column swirl soap.  Since we did not have wooden columns at our disposal, we thought we would improvise and try disposable cups.

To make this recipe, the majority of the ingredients and supplies can be found at Natures Garden.  You will however have to have water, lye, and your disposable cups- these items can not be purchased there.

For this soap, the scent that was selected was cannabis flower.  Now, since this scent has a vanillin content of .2%, we also included vanilla white color stabilizer in the recipe.  This decision was made after checking the cold process soap results for discoloration in this fragrance.  We saw that naturally without this additive the bar would discolor to a very light beige.  Considering we did not want our tie dye soap colors affected by this, it was a smart choice.  Also, since the mold that we are using is the 18 bar rectangle grid tray, we also decided to add sodium lactate to our recipe.  Not only will this allow the soap to be removed more easily from the mold, but it will also provide our finished bars with additional moisturizing aspects.

As for the colors in this soap, you can add as many or as few as you want.  Any of Natures Garden FUN Soap colorants will work!

So, lets get started in making tie dye soap.

Here is the recipe:
582 grams of water
215 grams of lye

413 grams of Shea Butter
306 grams of Coconut Oil 76
153 grams of Safflower Oil
107 grams of Rice Bran Oil
245 grams of Olive Oil pomace
184 grams of Meadowfoam Seed Oil
122 grams of Fractionated Coconut Oil
96 grams of Cannabis Flower Fragrance Oil
48 grams of Vanilla White Color Stabilizer
63 grams of Sodium Lactate

Now, if you would like to use the same colors shown in the steps, below are the weights.

Tie Dye Soap Colors:
6 grams of FUN Soap Colorant Neon Red
6 grams of FUN Soap Colorant Neon Yellow
6 grams of FUN Soap Colorant Neon Orange
6 grams of FUN Soap Colorant Neon Green
8 grams of FUN Soap Colorant Neon Blue
12 grams of FUN Soap Colorant Ultramarine Violet

If this is your first time making cold process soap, please Click Here For Basic CP Soap Making Class. Also, before attempting to make any cold process soap, please become familiar with Soap Making Safety Class.

Step 1:  Put on your safety gear:  This would include your safety gloves,  apron, safety mask, and safety glasses.

cp soap making safety gear

Step 2:  In your mold, space your 6 disposable cups equally apart from one another.

prepping your mold

Step 3:  In a small bowl, weigh out your lye.  In a separate bowl, weigh out your water.  In a well ventilated area, slowly pour the lye into the water.  Use a spatula to stir slowly.  Avoid breathing in any of the lye water fumes.  Keep stirring the lye water until there are no lye granules are left in the water.    Allow this to cool to 90-100 degrees F.

stirring the lye water

Step 4:  According to the recipe listed above: in a pot weigh out the Shea Butter and coconut oil 76.  Melt these two ingredients down on low heat until each one is in a liquid state.  Stir.  Then, add the safflower oil, rice bran oil, olive oil, meadowfoam seed oil, and fractionated coconut oil.  Stir again.  Remove from heat.  Then, transfer all of this into a large mixing bowl.

mixing your oils

Step 5:  Next, get your 6 mixing bowls.  Assign each bowl a color.  Then, weigh out the appropriate color amount for each bowl.

colorants in bowls

Step 6:  Using your thermometer, check the temperature of the lye water.  When it has cooled to 90 degrees Fahrenheit, add your Sodium Lactate.  Stir carefully.  Now, once the temperatures of the lye water and the soaping oils and butters are within 5-10 degrees of one another, it is time to move on to the next step.

adding sodium lactate to the recipe
Step 7:   Now, slowly pour the lye water/sodium lactate into your oils and butters bowl.  Use a spatula to get all of this out and into the other bowl.

adding lye water to the soaping oils

Step 8:  Using your stick blender, carefully mix everything together.  You will notice your batter will begin to look creamy and thicken slightly.  Now, stop blending.

blending the soap batter

Step 9:  Next, add the fragrance oil.

scenting the column swirl

Step 10:  Then, add the Vanilla White Color Stabilizer.  Once added, stick blend to incorporate.

adding vanilla white color stabilizer
Step 11:
  Now, place 405 grams of the soap batter into each bowl.  Stir each bowl with a spoon.  This will help slow down trace.

spoon stirred colored soap
Step 12: 
Starting with any one of your colors, begin to pour about half of the batter over 3 cups.  Repeat with a second and third color.  Then, using a new color, pour about half of the batter over the 3 cups that do not have soap over them yet.  Repeat this with your two remaining colors.  Then, with the remaining batter, keep covering different cups.  While you are doing this step, if any cups move, use your spatula to put them back into place.  When all of the pourable batter is out of your bowls, use your spatula to scrape the soap from the cups.  Then remove them.

column swirl pour
Step 13:  Now, using your spatula, scrape the colored bowls.  Then, splatter this soap over the mold.

splattering the soap
Step 14:  When all the soap is in the mold, insulate it and allow it to harden for 24 hours.

insulating your soap
Step 15:  After 24 hours, remove your soap from the mold.  Carefully, using a knife or a mitre cutter, slice the soap bars.  Once all of the soap is sliced, allow it to fully cure.

cutting your soap

After the cure time has elapsed, enjoy your Tie Dye Soap!

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients.