Make Your Own Candles, Soaps & Cosmetics
Download Recipe Download Class

MP Embed CP Soap Recipe

Recipe makes approximately 4.5 pounds of soap

Ingredients Found At Natures Garden:

Directions:

Other Ingredients & Equipment You'll Need:

Water

Cutting Board
Scale
Microwave safe glass container
Knife
Mixing Spoon (wood or stainless steel)
Spatula
Microwave
Rubbing alcohol in a spray bottle
Stick Blender
(3) Mixing bowls 

Wax Paper
Ruler

Recipe for Purple Swirls:
200 grams- Diamond Clear Melt and Pour Soap
10 grams- Bubble Luscious Fragrance Oil
35 drops Fun Soap Colorant Deep Purple

Recipe for Red Swirls:
200 grams- Diamond Clear Melt and Pour Soap
10 grams- Bubble Luscious Fragrance Oil
10 drops Fun Soap Colorant Tomato Red


Recipe for White Swirls:
200 grams- Goats Milk Melt and Pour Soap
10 grams- Bubble Luscious Fragrance Oil

Step 1:  On a flat surface, lay out 3 larger pieces of wax paper. 

Step 2:  Prepare the Purple Swirls:  Weigh out and melt 200 grams of Diamond Clear M&P Soap.  Do this in the microwave in 30 second increments.  Stir gently in between.  Once your soap is melted, add the fun soap colorant deep purple and bubble luscious fragrance oil.  Stir well.

Step 3:  Next, pour all of the purple soap unto one of the sheets of wax paper.  If you have any air bubbles in your soap, spritz the soap with alcohol.  Allow this to set up at room temperature. 

Step 4:  Prepare the Red Swirls:  Once again weigh out and melt 200 grams of Diamond Clear M&P Soap in the microwave.  When melted, this time add the fun soap colorant tomato red and fragrance oil.  Stir.

Step 5:  Now, pour the red soap onto another piece of wax paper.  Spritz with alcohol if you need to eliminate any bubbles.  Allow to set up at room temperature. 

Step 6:  Prepare the White Swirls:  Weigh out and melt 200 grams of Goats Milk M&P Soap in the microwave.  Once your soap is melted, add the bubble luscious fragrance oil.  Stir well.

Step 7:  Finally, pour all of the white soap unto the last sheet of wax paper.  If necessary spritz with alcohol to eliminate any bubbles.  Allow to set up at room temperature.

Cold Process Soap Ingredients:

431 grams of Water
154 grams of Lye
238 grams of Avocado Oil
79 grams of Castor Oil
238 grams of Coconut Oil 76
283 grams of Cocoa Butter
295 grams of Shea Butter
71 grams of Bubble Luscious Fragrance Oil
40 grams of Sodium Lactate

Cold Process Soap Colorants:
10 grams of Fun Soap Colorant Neon Pink
7 grams of Titanium Dioxide (for the whipped topping)

Step 1:  Put on your safety gear. 

Step 2:  First, make your lye solution.  Next, weigh out and melt the soaping ingredients.  Once melted, separate out 30 grams and place it in one of your mixing bowls.  To this add the 7 grams of titanium dioxide.  Stir well to make a liquid.  This will be for the whipped topping.  Set aside.

Step 3:  Once the lye solution has cooled, stir in the sodium lactate.

Step 4:  While you are waiting on temperatures:  Remove the purple, red, and white soap from the wax paper.  Using your cutting board and knife, trim off any jagged edges.  Next, cut 3 x 3 inch squares out of each color.  Repeat this until all of the soap is sliced into squares.  Then, gently curl the soap in a loose fashion.  Making your curls loose will help the soap batter easily fall into them (without air bubbles).  Finally, fill your square mold with all three colored swirls, but remember to save some red and purple curls for the whipped topping (if you can not make enough from the scraps).

Step 5:  When both the soaping oils and the lye solution are ready, combine them together.  Then, using your stick blender, blend to emulsify.  Then, add your fragrance oil.  Stick blend again to light trace. 

Step 6:  When your soap batter is at light trace, quickly grab your bowl with the titanium dioxide, and place 400 grams of soap batter into it.  Then, to the remaining soap batter, add the fun soap colorant neon pink.  Stick blend to incorporate, but you still want your soap batter to be on the thin side.

Step 7:  Now, slowly pour the soap batter into the mold.  Pouring slowly will help to eliminate air pockets in your soap.  Once you fill to around the half way point in your mold, tap the mold gently several time to release any air bubbles.   Then, continue to fill the mold.  When the mold is filled, tap one more time to release any final air pockets.    

Step 8:  Next, stick blend the white soap bowl.  Then, set aside

Step 9:  Once the pink soap has set up enough, start to carefully heap the white soap on top to resemble whipped topping. 
  
Step 10:  When the topping is in place, place some of the m& p swirls (red and purple) on top for decoration. 

Step 11:  After 48 hours, place the soap into the freezer for about 4 hours.  Then, remove the soap from the mold and let it reach room temperature.  When ready, cut the soap into slices.  Allow them to further cure before using.

We hope that you enjoy our MP Embed CP Soap Recipe!

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients. 

Upshot Commerce
Ecommerce
 
Shopping Cart Software by
 
Upshot Commerce