Make Your Own Candles, Soaps & Cosmetics
Download Recipe Download Class

Honeycomb Soap Recipe

By using bubble wrap, you can give your soaps a honeycomb appeal.

Recipe makes approximately (3)- 4oz. Honeycomb Bars.

Ingredients Found At Natures Garden:

Directions:

Other Ingredients & Equipment You'll Need:
Cutting Board
Scale
Microwave safe glass container
Large Knife
Mixing Spoon (wood or stainless steel)
Spatula
Microwave
Rubbing alcohol in a spray bottle
Bubble wrap

431 grams- Goat's Milk Melt and Pour Base
25 grams- Honeycomb Fragrance Oil
4 drops- Fun Soap Colorant Yellow Oxide


Clean & Sanitize your work area and all of your packaging materials. It is suggested that you wear gloves, protective clothing, and a hair net while preparing this recipe.


Step 1:  Prepare the Base:  In your microwave safe glass container, weigh out and melt 287 grams of Goat's Milk Melt and Pour Soap Base in the microwave 30 seconds at a time. Stir gently. Keep melting until all soap is in a liquid state.


Step 2: Add 1 drop FUN Yellow Oxide soap colorant to melted soap. Mix well.  Add 17 grams of Honeycomb Fragrance Oil; stir well.


Step 3: Lay your Basic Rectangle Mold on a flat surface and fill all (3) cavities 2/3 of the way full.  Allow this to set up at room temperature. 

Step 4:  Spray Down:  Using your alcohol in a spray bottle, generously spritz the top of the bars with alcohol.  This will allow the next layer of soap to adhere to the bars.

Step 5: Prepare the Honeycomb:  In your microwave safe glass container, weigh out and melt 144 grams of Goat's Milk Melt and Pour Soap Base in the microwave 30 seconds at a time. Stir gently. Keep melting until all soap is in a liquid state.

Step 6:  Add 3 drops FUN Yellow Oxide soap colorant to melted soap. Mix well. Add 8 grams of Honeycomb fragrance oil; stir well.

Step 7:  Carefully pour the soap into your rectangle molds to completely fill them. 

Step 8:  Next, take your bubble wrap and measure your cut.  You want to make sure you include 1 extra line of full bubbles to ensure the honeycomb pattern throughout the whole top of your soap. 

Step 9: Then, after cutting, simply lay the cut and fit bubble wrap (bubble side down) on top of the soap opening. Carefully and lightly, ensure that the bubble wrap is lying flat across your mold opening.  Caution:  Do not push down too hard, you do not want any liquid soap above the bubble wrap.

Step 10:  Allow your soap to fully set up at room temperature.  Then, gently pull the bubble wrap from the soap. 

Step 11:  Place the mold upside down. Using your thumbs, apply gentle pressure to the bar cavities. When the soap releases, your Honeycomb Soap is now ready to use.  Enjoy!

Natures Garden is not responsible for the performance of any of the recipes provided on our website. Testing is your responsibility. If you plan to resell any recipes we provide, it is your responsibility to adhere to all FDA regulations. If there are ingredients listed in a recipe that Natures Garden does not sell, we cannot offer any advice on where to purchase those ingredients.


 

Upshot Commerce
Ecommerce
 
Shopping Cart Software by
 
Upshot Commerce